ROUTE v2.0 includes major updates and follows an updated blueprint. However, note that this course does not cover all items listed on the blueprint. Some older topics have been removed or simplified, while several new IPv6 routing topics have been added. Course content has been adapted to Cisco IOS Software Release 15 and technically updated. Course also introduces new type of labs, called discovery labs. Discovery labs are instructor guided lab through which student explores new topics in an interactive way. All labs are developed only as virtual labs. To get the full course experience, you should cover everything, including Introduction, Discovery labs, Summary, and Module Self-Check.

• Training Type

Training

• Topics

ROUTE
• Module 1: Basic Network and Routing Concepts.
• Module 2: EIGRP Implementation.
• Module 3: OSPF Implementation.
• Module 4: Configuration of Redistribution.
• Module 5: Path Control Implementation.
• Module 6: Enterprise Internet Connectivity.
• Module 7: Routers and Routing Protocol Hardening.

SWITCH
• Module 1: Basic Concepts and Network Design.
• Module 2: Campus Network Architecture.
• Module 3: Spanning Tree Implementation.
• Module 4: Configuring Inter-VLAN Routing.
• Module 5: Implementing High Availability Networks.
• Module 6: First Hop Redundancy Implementation.
• Module 7: Campus Network Security.

TSHOOT
• Module 1: Tools and Methodologies of Troubleshooting.
• Module 2: Troubleshooting at SECHNIK Networking Ltd.
• Module 3: Troubleshooting at TINC Garbage Disposal Ltd.
• Module 4: Troubleshooting at PILE Forensic Accounting Ltd.
• Module 5: Troubleshooting at Bank of POLONA Ltd.
• Module 6: Troubleshooting at RADULKO Transport Ltd.

• Pre-requisites

It is highly recommended that this course be taken after the following Cisco courses:
Interconnecting Cisco Networking Devices v2.0, Part 1 (ICND1 v2.0) and Part 2 (ICND2 v2.0)

• Audience

Individuals interested in networking field

• Related Courses

• Implementing Cisco IP Routing (ROUTE) 2.0
• Implementing Cisco IP Switched Networks (SWITCH) 2.0
• Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) 2.0

• Value of Training

Upon successful completion of this course, trainees will be able to: -

• Describe routing protocols, different remote connectivity options and their impact on routing and implement RIPng
• Configure EIGRP & OSPF in IPv4 and IPv6 environment
• Implement route redistribution using filtering mechanisms and path control using policy based routing and IP SLA
• Implement enterprise Internet connectivity
• Secure Cisco routers according to best practices and configure authentication for routing protocols
• Describe the hierarchical campus structure, basic switch operation, use of SDM templates, PoE, and LLDP
• Implement VLANs, trunks, explain VTP, implement DHCP in IPv4 and IPv6 environment, and configure port aggregation
• Implement and optimize STP mechanism that best suits your network - PVSTP+, RPVSTP+, or MSTP
• Configure routing on a multi layer switch, Configure NTP, SNMP, IP SLA, port mirroring, and verify StackWise and VSS operation
• Implement First Hop redundancy in IPv4 and IPv6 environments
• Secure campus network according to recommended practices
• Describe the troubleshooting tools and methodologies that are used to identify and resolve issues in complex enterprise networks

• Training Hours

120 Hours